new DuploTrainBase()
The DuploTrainBase is emitted if the discovered device is a Duplo Train Base.
- Source:
Extends
Members
(readonly) batteryLevel
Properties:
| Name | Type | Description |
|---|---|---|
batteryLevel |
number | Battery level of the hub (Percentage between 0-100) |
- Overrides:
- Source:
(readonly) current
Properties:
| Name | Type | Description |
|---|---|---|
current |
number | Current usage of the hub (Amps) |
- Inherited From:
- Source:
(readonly) firmwareVersion
Properties:
| Name | Type | Description |
|---|---|---|
firmwareVersion |
string | Firmware version of the hub |
- Overrides:
- Source:
(readonly) name
Properties:
| Name | Type | Description |
|---|---|---|
name |
string | Name of the hub |
(readonly) rssi
Properties:
| Name | Type | Description |
|---|---|---|
rssi |
number | Signal strength of the hub |
(readonly) uuid
Properties:
| Name | Type | Description |
|---|---|---|
uuid |
string | UUID of the hub |
(readonly) voltage
Properties:
| Name | Type | Description |
|---|---|---|
voltage |
number | Voltage of the hub (Volts) |
- Inherited From:
- Source:
Methods
connect() → {Promise}
Connect to the Hub.
- Overrides:
- Source:
Returns:
Resolved upon successful connect.
- Type
- Promise
disconnect() → {Promise}
Disconnect the Hub.
- Overrides:
- Source:
Returns:
Resolved upon successful disconnect.
- Type
- Promise
getHubType() → {HubType}
Get the hub type.
- Overrides:
- Source:
Returns:
- Type
- HubType
getPortDeviceType(port) → {DeviceType}
Get the device type for a given port.
Parameters:
| Name | Type | Description |
|---|---|---|
port |
string |
- Overrides:
- Source:
Returns:
- Type
- DeviceType
hardStopMotor(port) → {Promise}
Fully (hard) stop the motor on a given port.
Parameters:
| Name | Type | Description |
|---|---|---|
port |
string |
- Source:
Returns:
Resolved upon successful completion of command.
- Type
- Promise
playSound(sound) → {Promise}
Play a built-in train sound.
Parameters:
| Name | Type | Description |
|---|---|---|
sound |
DuploTrainBaseSound |
- Source:
Returns:
Resolved upon successful issuance of command.
- Type
- Promise
rampMotorSpeed(port, fromSpeed, toSpeed, time) → {Promise}
Ramp the motor speed on a given port.
Parameters:
| Name | Type | Description |
|---|---|---|
port |
string | |
fromSpeed |
number | For forward, a value between 1 - 100 should be set. For reverse, a value between -1 to -100. Stop is 0. |
toSpeed |
number | For forward, a value between 1 - 100 should be set. For reverse, a value between -1 to -100. Stop is 0. |
time |
number | How long the ramp should last (in milliseconds). |
- Source:
Returns:
Resolved upon successful completion of command.
- Type
- Promise
setLEDColor(color) → {Promise}
Set the color of the LED on the train via a color value.
Parameters:
| Name | Type | Description |
|---|---|---|
color |
Color |
- Overrides:
- Source:
Returns:
Resolved upon successful issuance of command.
- Type
- Promise
setLEDRGB(red, green, blue) → {Promise}
Set the color of the LED on the Hub via RGB values.
Parameters:
| Name | Type | Description |
|---|---|---|
red |
number | |
green |
number | |
blue |
number |
- Inherited From:
- Source:
Returns:
Resolved upon successful issuance of command.
- Type
- Promise
setMotorSpeed(port, speed, timeopt) → {Promise}
Set the motor speed on a given port.
Parameters:
| Name | Type | Attributes | Description |
|---|---|---|---|
port |
string | ||
speed |
number | Array.<number> | For forward, a value between 1 - 100 should be set. For reverse, a value between -1 to -100. Stop is 0. If you are specifying port AB to control both motors, you can optionally supply a tuple of speeds. | |
time |
number |
<optional> |
How long to activate the motor for (in milliseconds). Leave empty to turn the motor on indefinitely. |
- Source:
Returns:
Resolved upon successful completion of command. If time is specified, this is once the motor is finished.
- Type
- Promise
setName(name) → {Promise}
Set the name of the Hub.
Parameters:
| Name | Type | Description |
|---|---|---|
name |
string | New name of the hub (14 characters or less, ASCII only). |
- Inherited From:
- Source:
Returns:
Resolved upon successful issuance of command.
- Type
- Promise
sleep(delay) → {Promise}
Sleep a given amount of time.
This is a helper method to make it easier to add delays into a chain of commands.
Parameters:
| Name | Type | Description |
|---|---|---|
delay |
number | How long to sleep (in milliseconds). |
Returns:
Resolved after the delay is finished.
- Type
- Promise
subscribe(port, modeopt) → {Promise}
Subscribe to sensor notifications on a given port.
Parameters:
| Name | Type | Attributes | Description |
|---|---|---|---|
port |
string | ||
mode |
number |
<optional> |
The sensor mode to activate. If no mode is provided, the default for that sensor will be chosen. |
- Overrides:
- Source:
Returns:
Resolved upon successful issuance of command.
- Type
- Promise
unsubscribe(port) → {Promise}
Unsubscribe to sensor notifications on a given port.
Parameters:
| Name | Type | Description |
|---|---|---|
port |
string |
- Overrides:
- Source:
Returns:
Resolved upon successful issuance of command.
- Type
- Promise
wait(commands) → {Promise}
Wait until a given list of concurrently running commands are complete.
This is a helper method to make it easier to wait for concurrent commands to complete.
Parameters:
| Name | Type | Description |
|---|---|---|
commands |
Array.<Promise.<any>> | Array of executing commands. |
Returns:
Resolved after the commands are finished.
- Type
- Promise
Events
color
Emits when a color sensor is activated.
Parameters:
| Name | Type | Description |
|---|---|---|
port |
string | |
color |
Color |
- Inherited From:
- Source:
speed
Emits on a speed change.
Parameters:
| Name | Type | Description |
|---|---|---|
port |
string | |
speed |
number |
- Inherited From:
- Source: